Thrust Bushing
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
The DALON Thrust Bushing achieved by means of sintering, which offer:
Load Direction:
All Thrust Bushingare designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.
Startup friction causes these porous Thrust Bushing to release a thin layer of oil on the bearing’s surface.
SAFTY
- Elimination of the risk of seizure
- Permanent lubrication film
- 20 ~30% of the volume is oil impregnated
- Quiet Function
- Low Friction coefficient
ECONOMY
- Elimination of lubricators
- Maintenance-free
- Permanent Stock
- Short Delivery Period
TECHNOLOGY
- High precision
- Loads up to 10MPa (100 kgs/Sq.cm)
- Speeds up to 30,000 r.p.m.
MATERIAL:
- SAE841/Lead free
IMPREGNATION OIL
- SAE OIL 30 / ISO-AT68 viscosity mineral oil
- Temperature from -20℃ to +120℃
ALLOWABLE LOAD
- PV = 2.5 MPa*m/s
DALON also possible to manufacture Thrust Bushing with different size, materials and lubricants by special request.
thrust bushing
.
Hot Tags: thrust bushing, China, manufacturers, suppliers, factory, wholesale, custom, phosphor bronze bush, small brass bushing, copper bush, metric sleeve bushing, Self lubricating sintered bearing, shift lever bushing
