Sintered Bronze Spherical with Ring Bushing
DALON SINTERED BRONZE BUSHING INTRODUCTION: DALON self-lubricating Sintered Bronze Spherical with Ring Bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
DALON Sintered Bronze Spherical with Ring Bushing PROPERTIES
GENERAL | Unit | Value | |
Maximum load, p | Static Dynamic | N/mm2 N/mm2 | 20 10 |
Operating temperature | Min Max | °C °C | -180 +300 |
Minimum density | g/cm3 | 6.2 | |
Minimum apparent porosity | % | 20 | |
Maximum sliding speed, U | m/s | 0.1 - 6.0 * | |
Maximum pU factor | N/mm2 x m/s | 0.1 - 1.8 * | |
Coefficient of friction | 0.05 - 0.25 * | ||
Surface roughness, Ra | µm | ≤ 0.3 - ≤ 0.6 | |
Surface hardness | HB | > 240 - > 355 | |
DALON Sintered Bronze Spherical with Ring Bushing MATERIAL STRUCTURE
MATERIAL CODE | BASIC METAL | ALLOY COMPOSITION |
Bronze based | CuSn9010/ SAE841 ASTM B438-70; SintA50/CuSnPb663 | Cu87.5~90.5,Fe1.0max,Sn9.5~10.5; CuSn663 |
Standard material specifications include: SAE 841 (CuSn9010), ASTMB 438 Grade 1 Type II,
CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications
Sintered Bronze and iron based self-lubricating bushings are made of two different functions:
The metallic alloy structure which supports and transfers the mechanical loads
The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.
DALON SINTERED BRONZE SPHERICAL WITH RING BUSHING MATERIAL STRUCTURE
MATERIAL CODE | BASIC METAL | ALLOY COMPOSITION |
Bronze based | SAE841 ASTM B438-70; SintA50 | Cu87.5~90.5,Fe1.0max,Sn9.5~10.5; CuSn663 |
Standard material specifications include: SAE 841, ASTMB 438 Grade 1 Type II,
CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications
Sintered Bronze and iron based self-lubricating bushings are made of two different functions:
The metallic alloy structure which supports and transfers the mechanical loads
The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.
DALON SINTERED BRONZE SPHERICAL WITH RING BUSHING APPLICATIONS:
DALON Sintered bronze spherical with ring bushing are recommended for following movements:
●Rotation
●Oscillation
●Linear
Other different type of materials is available for specific requirements, such as:
●Higher speeds requirement
●Higher loads requirement
Hot Tags: sintered bronze spherical with ring bushing, China, manufacturers, suppliers, factory, wholesale, custom, Oil Impregnated Bronze bushing, flanged sleeve bearing, sintered metal bushing, metal bushing sleeve, Sintered Filter, Self Lubricating Bronze Bushings
