Phosphor Bronze Bush
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
DALON BUSHING INTRODUCTION:
DALON self-lubricatingphosphor bronze bushare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).
TOLERANCES OF phosphor bronze bush
Our sintered sliding bearings can be manufactured in accordance with the primary DIN1494, ISO and MPIF standards, but can also made to meet special requirements.
DALON phosphor bronze bush PROPERTIES
|
GENERAL |
|
Unit |
Value |
|
Maximum load, p |
Static Dynamic |
N/mm2 N/mm2 |
20 10 |
|
Operating temperature |
Min Max |
°C °C |
-180 +300 |
|
Minimum density |
|
g/cm3 |
6.2 |
|
Minimum apparent porosity |
|
% |
20 |
|
Maximum sliding speed, U |
m/s |
0.1 - 6.0 * |
|
|
Maximum pU factor |
N/mm2 x m/s |
0.1 - 1.8 * |
|
|
Coefficient of friction |
|
0.05 - 0.25 * |
|
|
Surface roughness, Ra |
µm |
≤ 0.3 - ≤ 0.6 |
|
|
Surface hardness |
HB |
> 240 - > 355 |
|
Hot Tags: phosphor bronze bush, China, manufacturers, suppliers, factory, wholesale, custom, front end bushing, Food industry Bronze Bushing, long life sleeve bearing, plain shaft bearing, sleeve ring bearing, phosphor bronze bearing
