Phosphor Bronze Bearing
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
DALON BUSHING INTRODUCTION:
DALON self-lubricatingPhosphor Bronze Bearingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).
DALON Phosphor Bronze Bearing PROPERTIES
|
GENERAL |
|
Unit |
Value |
|
Maximum load, p |
Static Dynamic |
N/mm2 N/mm2 |
20 10 |
|
Operating temperature |
Min Max |
°C °C |
-180 +300 |
|
Minimum density |
|
g/cm3 |
6.2 |
|
Minimum apparent porosity |
|
% |
20 |
|
Maximum sliding speed, U |
m/s |
0.1 - 6.0 * |
|
|
Maximum pU factor |
N/mm2 x m/s |
0.1 - 1.8 * |
|
|
Coefficient of friction |
|
0.05 - 0.25 * |
|
|
Surface roughness, Ra |
µm |
≤ 0.3 - ≤ 0.6 |
|
|
Surface hardness |
HB |
> 240 - > 355 |
|
Hot Tags: phosphor bronze bearing, China, manufacturers, suppliers, factory, wholesale, custom, starter bushing, thrust bushing, Sintered Bushing, phosphor bronze bush, Electric Motor Bronze bushing, copper bush
