Long Life Sleeve Bearing
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction


DALON Long Life Sleeve BearingADVANTAGE:
With no moving parts, Long Life Sleeve Bearing are the simplest type of bearing. Compared to ball and roller bearings, they generally handle higher temperatures and perform better in dirty environments. They are also intended by design to be self-lubricating, maintenance free and low cost.
Performance
An extremely wide range of operating loads, speeds and temperatures:
-
Dynamic loads from 6 to 75 MPa
-
Linear speeds up to 8 m/s
-
Operating temperatures from - 180°C to + 300°C
Suitable for use in a wide range of environments
-
Marine environment
-
Radio-active environments
-
Contact with corrosive liquids or substances incompatible with oils
-
Food preparation
Reduce of design and ownership costs
-
Maintenance-free operation
-
Lower cost compared to cast metal and machined bearings
-
Complex designs and forms possible
-
High dimensional accuracy
-
Excellent surface finish
-
Reduced weight compared to similar non-porous components
Safety
-
Permanent oil film lubrication
-
Low friction factor
-
Quiet operation
-
Good operation at low speed
-
Corrosion resistance
Load Direction:
All Long Life Sleeve Bearing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.
Startup friction causes these porous Long Life Sleeve Bearing to release a thin layer of oil on the bearing’s surface.







long life sleeve bearing
Hot Tags: long life sleeve bearing, China, manufacturers, suppliers, factory, wholesale, custom, shaft bushing, oil filled bronze bush, brass bearing bushing, metric flanged sleeve bearing, Flanged Sintered Bronze Bushing, Bronze Sleeve bushing









