Custom Bronze Bushing
DALON self-lubricating custom bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction


DALON BUSHING INTRODUCTION:
DALON self-lubricatingCustom Bronze Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).
The DALON Custom Bronze Bushing achieved by means of sintering, which offer:
SAFTY
- Elimination of the risk of seizure
- Permanent lubrication film
- 20 ~30% of the volume is oil impregnated
- Quiet Function
- Low Friction coefficient
ECONOMY
- Elimination of lubricators
- Maintenance-free
- Permanent Stock
- Short Delivery Period
TECHNOLOGY
- High precision
- Loads up to 10MPa (100 kgs/Sq.cm)
- Speeds up to 30,000 r.p.m.
MATERIAL:
- SAE841/Lead free
IMPREGNATION OIL
- SAE OIL 30 / ISO-AT68 viscosity mineral oil
- Temperature from -20℃ to +120℃
ALLOWABLE LOAD
- PV = 2.5 MPa*m/s







As rich and long experience in P/M technology, DALON also offer Technical support for customers in the design and application of custom bronze bushing , selection of available materials and lubricants for Special-purpose equipment compression molds, furnaces, handling, sizing, deburring and impregnation.
Hot Tags: custom bronze bushing, China, manufacturers, suppliers, factory, wholesale, custom, Sintered Starter Bushing, bush bearing, shoulder bushing, graphite sleeve bearing, Bronze Sleeve bushing, Bronze Sleeve Bushings









