Various Microns Porous Polyethlene Sintering Water Filter PE Candle Filter for Replacement

Various Microns Porous Polyethlene Sintering Water Filter PE Candle Filter for Replacement

Sintered materials of POROUS PLASTIC FILTERS offer a self-supporting structure with high mechanical strength. DALON manufacture various filter grades with specified pore sizes of POROUS PLASTIC FILTERS and flow rates in order to have the appropriate solution for your requirements.

Product Introduction

We have been a stable and reliable supplier of Plastic Filter Element, Porous Metal Filter, Pneumatic Sintered Brass Muffler on the market with our rich experience and continuous innovation technology. Taking technology as the first, market-oriented, and providing customers with high-quality products and services in a sincere, dedicated spirit is our consistent corporate culture. Facing the challenges of technology and market competition, our company has always implemented responsibility, principles, and rules as the vane.

DALON manufacturer of Porous Plastic Filters since 2002, offers a variety of solutions to meet our customer requirements.


Our filter are applied in sparging, sensor protection, gas and liquid filtration, dampening, bulk handling and etc. which for solution of corrosive and high temperature environments ,which made of stainless steels, bronze, plastic, which can be manufactured up to 1,000 mm length and 250 mm OD. Larger elements also can be assembled by welding procedure.


Porous Plastic Filter


Standard Geometries of Porous Plastic Filters

Porous PE Filter

DALON FILTER Discs and Plugs

1) Ø d 1 mm to Ø d 250 mm

2) up to h 100 mm


DALON FILTER Rings and Hollow cylinder

1) Ø d 4 mm to Ø d 250 mm

2) up to h 1000 mm

and according to diameter, either seamless or welded from sections



DALON FILTER Plates

1) length up to 1000 mm

2) width up to 250 mm

3) height up to 50 mm

4) larger dimensions welded from sections                             


Porous PE Filter



Sintered materials of POROUS PLASTIC FILTERS offer a self-supporting structure with high mechanical strength. DALON manufacture various filter grades with specified pore sizes of POROUS PLASTIC FILTERS and flow rates in order to have the appropriate solution for your requirements.


Application Examples

●Aeration: The POROUS PLASTIC FILTERS air circulation through porosity results in a constant and controlled air flow at the exit of the porous component. The use sectors are: liquids re-passing in food industry (liqueurs, wines, and gas beverages), ionization, gas burners, aquaria, clinical analysis, etc.

●Fluidization. The POROUS PLASTIC FILTERS air circulation through the porous component has as result that the exit flow is distributed with the same pressure in all points, allowing then the controlled handling of powdered products. This property is used for: transporting cement, flour, alumina, ashes, toner powder, etc.


Sintered Porous PE Filter


Porous Plastic Filters Properties and application examples

DALON Porous Plastic Filters could be used with air powered tools, valves, and cylinders to reduce noise and filtering exhaust fumes.

For purpose of reduce noise, filtration, and flow ratings , please selecting DALON mufflers, breather vents, and filters in below ways:

1) Noise Measured in decibels (dB), the rating indicates how much Filters reduces exhaust noise from your tool or equipment. Usually recommends hearing protection for exposure higher than 80 dB.

2) Filtration: Filters trap particles to clean the air exhausting to the environment or going into your equipment. The size of particles is measured in microns; the lower the number of microns, the smaller the particles that are removed from the air.

3) Flow—Measured in standard cubic meter per minute, this rating is the maximum air flow that a product can withstand.


Sintered PE Porous Filter


Please Note to choose the correct pipe size, measure the threaded inside diameter (ID) or outside diameter (OD) of your pipe or valve, usually DALON can offer filter types in standard threading from 1/8 to 1 inch. Filters with pipe connections thread into NPT or metric threaded exhau.



bronze filter_12

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth 'unification, determination, tolerance' for Various Microns Porous Polyethlene Sintering Water Filter PE Candle Filter for Replacement. With the development concept of people-oriented and quality first, our company strictly manages all aspects and is committed to long-term development with customers and serving the society. Our company has always taken science and technology as the guide, development as the fundamental, to meet the requirements of users as the central concept.

Hot Tags: porous plastic filters, China, manufacturers, suppliers, factory, wholesale, custom, Manual Disc Filters, Sintered Iron Fan Bushing, Sintered Disk Filter, Pipe Cap Filters, plastic vacuum silencer, stainless steel gravity water filter

[[ProKeywords]]
You Might Also Like