enLanguage

Products

V Groove Guide Rail Bearing with Eccentric Bush/Shaft

V Groove Guide Rail Bearing with Eccentric Bush/Shaft

DALON self-lubricating bush bearing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

We persevere in the development of technological innovation, integrate the most advanced technology into our product production, and strive to create perfect Sintered Bronze Spherical With Ring Bushing, Porous Plastic Plate filter, Easy Clean Muffler. We are always committed to product quality control, focus on technology research and development and innovation, strengthen the concept of service, step by step. We consolidate and solidify the knowledge and technical reserves of our employees, and improve their professional ethics and their own realm.

bush bearingbush bearing

DALON BUSHING INTRODUCTION:

DALON self-lubricatingBush Bearingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).

DALON Bush BearingFAQ:

Q: Lubricant Oil Selection?

A: Standard impregnating oil conforms to SAE 30 specifications

Lubricants are suitable for the temperature range from -40°C to 150°C

Also have option for customer to made special oil impregnation by self

 

Q: De-impregnation & Re-Impregnation?

A: De-impregnation required Degrease and wash in appropriate solvent

Eliminate the lubricant in a furnace heated around 400°C for 40 minutes under a neutral atmosphere such as N2, or with reducing agent such as N2 + H2

Re-Impregnation need Immerge during one hour the parts in an oil bath heated at a temperature between 60°C and 120°C, depending on oil viscosity .Then cool down in an oil bath back to room temperature. Finally drain and dry the self-lubricating bearings.

Bush Bearingbronze flanged sleeve bearingbronze flange bearing

spherical flanged thrust linear plain bronze metal sliding shaft bush bearing

We closely follow the development of domestic and foreign technology and seize the high point of V Groove Guide Rail Bearing with Eccentric Bush/Shaft industry technology. In the long-term pursuit of the brand, our company integrates various resources to lay a solid technical foundation for the long-term development of the company. Looking back on yesterday's glory, we are not arrogant and impetuous.

Hot Tags: bush bearing, China, manufacturers, suppliers, factory, wholesale, custom, Oil Embedded Sleeve Bronze Bearing, phosphor bronze bush, Washable Metal Air filter, eccentric bushing, Bronze Sleeve Bushings, square shaft linear bearing

[[ProKeywords]]
You Might Also Like