enLanguage

Products

Tranformer Bushing for Transmission Line

Tranformer Bushing for Transmission Line

DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

Our mission is to create superior filter steel, plastic exhaust silencer, High Flow Muffler and continuously improve the quality of the product and related service. The behavior and professional ethics of our employees have been clearly regulated, and the culture and skill level of our employees have been significantly improved. The in-depth improvement of the company's internal management mechanism has laid a solid foundation for the long-term and sustainable development of the company, and provided a comprehensive guarantee for the production of products trusted by customers. We will provide you with fast and high quality service with excellent technology and 100% success rate.

custom bronze bushingbush bearing

DALON BUSHING INTRODUCTION:

DALON self-lubricatingTransmission Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).

The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of Transmission Bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

System of Measurement

Inch / Metric

Bearing Type

Plain

Plain Bearing Type

Sleeve / Flange / Spherical * with Ring

For Load Direction

Radial

Material

SAE841 Bronze(CuSn9010) / SAE660 /A50-B50

Tolerance Standard

F7 r7 Js13

Lubrication Method

Embedded Lubricated

For Shaft Type

Round

Shaft Mount Type

Slip Fit

 

Load Direction:

All Transmission Bushing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.

Startup friction causes these porous Transmission Bushing to release a thin layer of oil on the bearing’s surface.

DALON Transmission Bushing MATERIAL STRUCTURE

MATERIAL CODE

BASIC METAL

ALLOY COMPOSITION

Bronze based

CuSn9010/ SAE841 ASTM B438-70; SintA50/CuSnPb663

Cu87.5~90.5,Fe1.0max,Sn9.5~10.5; CuSn663

Standard material specifications include: SAE 841 (CuSn9010), ASTMB 438 Grade 1 Type II,

CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications

Sintered Bronze and iron based self-lubricating bushings are made of two different functions:

The metallic alloy structure which supports and transfers the mechanical loads

The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.

Performance

An extremely wide range of operating loads, speeds and temperatures:

  1. Dynamic loads from 6 to 75 MPa
  2. Linear speeds up to 8 m/s
  3. Operating temperatures from - 180°C to + 300°C

Suitable for use in a wide range of environments

  1. Marine environment
  2. Radio-active environments
  3. Contact with corrosive liquids or substances incompatible with oils
  4. Food preparation

Reduce of design and ownership costs

  1. Maintenance-free operation
  2. Lower cost compared to cast metal and machined bearings
  3. Complex designs and forms possible
  4. High dimensional accuracy
  5. Excellent surface finish
  6. Reduced weight compared to similar non-porous components

Transmission Bushingbronze flanged sleeve bearingbronze flange bearingtransmission bushing

transmission bushing

.

 

 

We encourage the sustainable use of resources in our Tranformer Bushing for Transmission Line and business operations and strive to design products that are environmentally friendly. Our economic development strategy emphasizes the importance of enterprises and the market, rather than the rigid development assistance system, which can only be obtained continuously. We are committed to building our company into an enterprise with more scientific management, more standardized operations, more steady development, and greater competitiveness.

Hot Tags: transmission bushing, China, manufacturers, suppliers, factory, wholesale, custom, sleeve ring bearing, plain shaft bearing, Sintered Bronze Spherical Bushing, Porous Plastic Plate filter, Stainless Steel Muffler, small linear bearing

[[ProKeywords]]
You Might Also Like