We always keep pace with the times, implementing brand operation strategy, thus making our Industrial Disk filter, 02 micron air filter, microplastic filter have excellent cost performance and efficient and fast service characteristics. Pioneering and innovation is our foundation, and talents are the main support for technological innovation and progress. Based on the scientific concept of 'development comes from communication', we constantly provide customers with new products and high-quality services.

Plastic Element Filter are made from spherical PE powder. the form, size and distribution of the powder are important parameters which affect the filters' properties.

There are two main types of Plastic Element Filter as Hydrophilic & Hydrophobic

Sintered PE filters are produced using the gravity sintering method. the PE powder is placed in a mold and sintered.

During sintering, the powder particles are fused to one another at temperatures well below the melting point of the material. this process gives the highly porous filters their characteristic shape and properties.

After sintering, the size and position of the pores are mechanically fixed. the powder particles also form a rigid whole. this gives the filters a strength, form and stability equal to those of a plastic component.

Porous P/M parts are capable of extremely fine degrees of filtration. The subject of absolute vs. nominal filtration or micron ratings is too complex to be treated here; it is so complex, in fact, that much of the filter design in P/M porous media on new applications has been performance oriented (actual test of samples) rather than based on theoretical design data.

In designing for P/M porous parts, it is assumed has a clear understanding of the function which wished the product to accomplish: in most cases, some phase of fluid control.

Tthe performance functions of DALON plastic filters are listed in four groups:

1) Filtration – defined as a separation process (removal of a gas, liquid, or solid from a gas or liquid) with as low a pressure drops a feasible.

2) Flow Control – defined as the establishment of a specific pressure drop in a fluid flow system.

3) Distribution – defined as the ability to provide a uniform fluid flow over a wide area, as in a sparger, air bearing or vacuum hold-down plate.

4) Porosity – defined as the interconnected open area within the matrix.

For more details, please contact DALON!

We have been producing and operating Sinotruk Air Filter Assy Wg9719190001 for many years, and have a high degree of confidence in ensuring the superior quality of the products. We are fully aware that as long as we cooperate on the basis of mutual benefit and mutual respect, we will certainly make achievements. We are committed to the cause of environmental protection and continuously improve the technology level in the field of environmental protection.

Hot Tags: plastic element filter, China, manufacturers, suppliers, factory, wholesale, custom, filter steel, transmission bushing, stainless steel water bottle with filter, porous sheet filter, plain shaft bearing, wire mesh air filter