PTFE Membrane Filter

PTFE Membrane Filter

Sintered materials of POROUS PLASTIC FILTERS offer a self-supporting structure with high mechanical strength. DALON manufacture various filter grades with specified pore sizes of POROUS PLASTIC FILTERS and flow rates in order to have the appropriate solution for your requirements.

Product Introduction

Our company has a senior technical team with rich experience in the industry for many years. We have been committed to the field of compressor air filter, 304 stainless steel muffler, Powder Metallurgy Bushing for a long time. Please feel free to contact us! According to the requirements of the industry, we establish and improve the quality assurance system, and the quality of our products is stable. Our company has always insisted on pragmatic work to make customers feel at ease, innovative technology to meet customer requirements, good faith attitude to reach a win-win situation, to help the majority of users overcome technical difficulties.

DALON manufacturer of Porous Plastic Filters since 2002, offers a variety of solutions to meet our customer requirements.


Our filter are applied in sparging, sensor protection, gas and liquid filtration, dampening, bulk handling and etc. which for solution of corrosive and high temperature environments ,which made of stainless steels, bronze, plastic, which can be manufactured up to 1,000 mm length and 250 mm OD. Larger elements also can be assembled by welding procedure.


Porous Plastic Filter


Standard Geometries of Porous Plastic Filters

Porous PE Filter

DALON FILTER Discs and Plugs

1) Ø d 1 mm to Ø d 250 mm

2) up to h 100 mm


DALON FILTER Rings and Hollow cylinder

1) Ø d 4 mm to Ø d 250 mm

2) up to h 1000 mm

and according to diameter, either seamless or welded from sections



DALON FILTER Plates

1) length up to 1000 mm

2) width up to 250 mm

3) height up to 50 mm

4) larger dimensions welded from sections                             


Porous PE Filter



Sintered materials of POROUS PLASTIC FILTERS offer a self-supporting structure with high mechanical strength. DALON manufacture various filter grades with specified pore sizes of POROUS PLASTIC FILTERS and flow rates in order to have the appropriate solution for your requirements.


Application Examples

●Aeration: The POROUS PLASTIC FILTERS air circulation through porosity results in a constant and controlled air flow at the exit of the porous component. The use sectors are: liquids re-passing in food industry (liqueurs, wines, and gas beverages), ionization, gas burners, aquaria, clinical analysis, etc.

●Fluidization. The POROUS PLASTIC FILTERS air circulation through the porous component has as result that the exit flow is distributed with the same pressure in all points, allowing then the controlled handling of powdered products. This property is used for: transporting cement, flour, alumina, ashes, toner powder, etc.


Sintered Porous PE Filter


Porous Plastic Filters Properties and application examples

DALON Porous Plastic Filters could be used with air powered tools, valves, and cylinders to reduce noise and filtering exhaust fumes.

For purpose of reduce noise, filtration, and flow ratings , please selecting DALON mufflers, breather vents, and filters in below ways:

1) Noise Measured in decibels (dB), the rating indicates how much Filters reduces exhaust noise from your tool or equipment. Usually recommends hearing protection for exposure higher than 80 dB.

2) Filtration: Filters trap particles to clean the air exhausting to the environment or going into your equipment. The size of particles is measured in microns; the lower the number of microns, the smaller the particles that are removed from the air.

3) Flow—Measured in standard cubic meter per minute, this rating is the maximum air flow that a product can withstand.


Sintered PE Porous Filter


Please Note to choose the correct pipe size, measure the threaded inside diameter (ID) or outside diameter (OD) of your pipe or valve, usually DALON can offer filter types in standard threading from 1/8 to 1 inch. Filters with pipe connections thread into NPT or metric threaded exhau.



bronze filter_12

We will use the great nation's ingenuity to cast high-quality PTFE Membrane Filter and provide thoughtful services with our responsibilities. We continue to shape the iconic image of the company, highlighting our unique culture and characteristics. We actively build a win-win community of interests between the company and the employees, so that the employees can grow together with the company in an atmosphere full of humanistic care.

Hot Tags: porous plastic filters, China, manufacturers, suppliers, factory, wholesale, custom, Filter Disc, stainless muffler, perfume filter, humidity filter, microplastic water filter, Stainless Steel Washable Mesh filter

[[ProKeywords]]
You Might Also Like