enLanguage

Products

Power Transmission Components Taper Lock Bushing

Power Transmission Components Taper Lock Bushing

DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

We will always take quality as the theme and continue to cooperate sincerely with friends at home and abroad relying on the 'quality strategy' to jointly create the glory of the graphite impregnated bushing, 40 micron filter, stainless steel gravity water filter industry! We focus on cultivating company employees with better management thinking and awareness, good willingness to learn and development potential. Excellent technology, highly competitive market prices, and satisfactory after-sales service have not only won us business opportunities, but also won the trust and support of our customers.

custom bronze bushingbush bearing

DALON BUSHING INTRODUCTION:

DALON self-lubricatingTransmission Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).

The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of Transmission Bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

System of Measurement

Inch / Metric

Bearing Type

Plain

Plain Bearing Type

Sleeve / Flange / Spherical * with Ring

For Load Direction

Radial

Material

SAE841 Bronze(CuSn9010) / SAE660 /A50-B50

Tolerance Standard

F7 r7 Js13

Lubrication Method

Embedded Lubricated

For Shaft Type

Round

Shaft Mount Type

Slip Fit

 

Load Direction:

All Transmission Bushing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.

Startup friction causes these porous Transmission Bushing to release a thin layer of oil on the bearing’s surface.

DALON Transmission Bushing MATERIAL STRUCTURE

MATERIAL CODE

BASIC METAL

ALLOY COMPOSITION

Bronze based

CuSn9010/ SAE841 ASTM B438-70; SintA50/CuSnPb663

Cu87.5~90.5,Fe1.0max,Sn9.5~10.5; CuSn663

Standard material specifications include: SAE 841 (CuSn9010), ASTMB 438 Grade 1 Type II,

CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications

Sintered Bronze and iron based self-lubricating bushings are made of two different functions:

The metallic alloy structure which supports and transfers the mechanical loads

The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.

Performance

An extremely wide range of operating loads, speeds and temperatures:

  1. Dynamic loads from 6 to 75 MPa
  2. Linear speeds up to 8 m/s
  3. Operating temperatures from - 180°C to + 300°C

Suitable for use in a wide range of environments

  1. Marine environment
  2. Radio-active environments
  3. Contact with corrosive liquids or substances incompatible with oils
  4. Food preparation

Reduce of design and ownership costs

  1. Maintenance-free operation
  2. Lower cost compared to cast metal and machined bearings
  3. Complex designs and forms possible
  4. High dimensional accuracy
  5. Excellent surface finish
  6. Reduced weight compared to similar non-porous components

Transmission Bushingbronze flanged sleeve bearingbronze flange bearingtransmission bushing

transmission bushing

.

 

 

The technical indicators of the Power Transmission Components Taper Lock Bushing products produced by our company are at the advanced level in the same industry, and can be produced according to orders. Our company tenet is to take humanism as the sentiment, green as the theme, technology as the means, and environmental protection as the goal. The core concept of our company as a whole, concentrates on answering the fundamental questions of development, and is the banner that leads us to keep moving forward.

Hot Tags: transmission bushing, China, manufacturers, suppliers, factory, wholesale, custom, Flanged Bronze bushing, oil filled bushing, Bronze Sleeve Bearings, Powder Metallurgy Part, Sae 660 Bronze Bushing, Sintered Iron Oil Retaining Bushing

[[ProKeywords]]
You Might Also Like