enLanguage

Products

Pin Bush Coupling Original Diesel Con Engine Main Bearing

Pin Bush Coupling Original Diesel Con Engine Main Bearing

DALON self-lubricating bush bearing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

We always take market opportunities as our guide and considerate service as our carrier to strictly control the quality of our Sintered Metal Porous filter, porous polyethylene filter, graphite filled 841 bronze bearing. We take fine management as a means to actively strengthen crisis awareness and build core competence. We enhance the practical operation ability of employees at all levels in the work, to achieve people-oriented, meritocratic, and the best use of people's talents. We continue to learn, continuous improvement, turn challenges and pressure into opportunities and motivation, turn goals into reality, and continuously improve our core competitiveness.

bush bearingbush bearing

DALON BUSHING INTRODUCTION:

DALON self-lubricatingBush Bearingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).

DALON Bush BearingFAQ:

Q: Lubricant Oil Selection?

A: Standard impregnating oil conforms to SAE 30 specifications

Lubricants are suitable for the temperature range from -40°C to 150°C

Also have option for customer to made special oil impregnation by self

 

Q: De-impregnation & Re-Impregnation?

A: De-impregnation required Degrease and wash in appropriate solvent

Eliminate the lubricant in a furnace heated around 400°C for 40 minutes under a neutral atmosphere such as N2, or with reducing agent such as N2 + H2

Re-Impregnation need Immerge during one hour the parts in an oil bath heated at a temperature between 60°C and 120°C, depending on oil viscosity .Then cool down in an oil bath back to room temperature. Finally drain and dry the self-lubricating bearings.

Bush Bearingbronze flanged sleeve bearingbronze flange bearing

spherical flanged thrust linear plain bronze metal sliding shaft bush bearing

We promote independent innovation and technological progress, speed up the renewal of existing Pin Bush Coupling Original Diesel Con Engine Main Bearing and the transformation of technical equipment. The rapid development of science and technology has contributed to the rapid economic development, among which e-commerce plays an important role. We believe in people-oriented enterprise philosophy. In terms of contributing to society, serving customers and making profits, we have given priority to the growth, happiness and perfection of human beings.

Hot Tags: bush bearing, China, manufacturers, suppliers, factory, wholesale, custom, plastic tap water filter, compressor air filter, Sintered Bronze Filters, graphite impregnated bushing, brass bearing bushing, Bronze Sleeve

[[ProKeywords]]
You Might Also Like