enLanguage

Products

LV Transformer Bushings for Transmission Lines

LV Transformer Bushings for Transmission Lines

DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

In the production process of sintered metal silencer muffler, 02 micron filter, Plastic Muffler, strict process control and quality inspection system are implemented. Relying on the company's accumulated experience in successful brand operation, we are committed to optimizing and perfecting the company's terminal network channel construction. Our company has been adhering to the quality of products as the basis of survival, to meet the requirements of customers with high quality service as the goal.

custom bronze bushingbush bearing

DALON BUSHING INTRODUCTION:

DALON self-lubricatingTransmission Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).

The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of Transmission Bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

System of Measurement

Inch / Metric

Bearing Type

Plain

Plain Bearing Type

Sleeve / Flange / Spherical * with Ring

For Load Direction

Radial

Material

SAE841 Bronze(CuSn9010) / SAE660 /A50-B50

Tolerance Standard

F7 r7 Js13

Lubrication Method

Embedded Lubricated

For Shaft Type

Round

Shaft Mount Type

Slip Fit

 

Load Direction:

All Transmission Bushing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.

Startup friction causes these porous Transmission Bushing to release a thin layer of oil on the bearing’s surface.

DALON Transmission Bushing MATERIAL STRUCTURE

MATERIAL CODE

BASIC METAL

ALLOY COMPOSITION

Bronze based

CuSn9010/ SAE841 ASTM B438-70; SintA50/CuSnPb663

Cu87.5~90.5,Fe1.0max,Sn9.5~10.5; CuSn663

Standard material specifications include: SAE 841 (CuSn9010), ASTMB 438 Grade 1 Type II,

CuSn 6-6-3, Sint B 50 & Standard impregnating oil conforms to SAE 30 specifications

Sintered Bronze and iron based self-lubricating bushings are made of two different functions:

The metallic alloy structure which supports and transfers the mechanical loads

The oil lubricant or graphite contents which separates two surfaces in relative motion and to reduce friction.

Performance

An extremely wide range of operating loads, speeds and temperatures:

  1. Dynamic loads from 6 to 75 MPa
  2. Linear speeds up to 8 m/s
  3. Operating temperatures from - 180°C to + 300°C

Suitable for use in a wide range of environments

  1. Marine environment
  2. Radio-active environments
  3. Contact with corrosive liquids or substances incompatible with oils
  4. Food preparation

Reduce of design and ownership costs

  1. Maintenance-free operation
  2. Lower cost compared to cast metal and machined bearings
  3. Complex designs and forms possible
  4. High dimensional accuracy
  5. Excellent surface finish
  6. Reduced weight compared to similar non-porous components

Transmission Bushingbronze flanged sleeve bearingbronze flange bearingtransmission bushing

transmission bushing

.

 

 

We have absorbed a large number of advanced technologies at home and abroad, and listened to the feedback of our customers, committed to the research and development of LV Transformer Bushings for Transmission Lines. On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company's aim is to produce high quality products and provide customers with the expected service.

Hot Tags: transmission bushing, China, manufacturers, suppliers, factory, wholesale, custom, Graphite Sleeve Bearings, plain sleeve bearing, SAE 841 Bronze Bearing, Bronze Silencer, Porous Metal Filters, Iron Bushing

You Might Also Like