We continue to promote independent innovation and technological progress, improve product quality of our sintered metal filter disc, steel water filters, Graphite Impregnated Bronze Bushings and service level. Over the years, we have been committed to the development and technological transformation of new products, and accumulated a wealth of professional experience. Perseverance is the key to showing the effectiveness of implementation. We have made positive contributions to social welfare and the progress and development of social civilization, and have had a great social impact. We strive to fully realize the comprehensive, diversified, three-dimensional and leapfrog development of the group.

DALON POLYETHYLENE FILTER INTRODUCTION:

Plastic polyethylene filter are made from spherical PE powder. the form, size and distribution of the powder are important parameters which affect the filters' properties.

Gravity or “loose powder” sintering is used to make porous plastic parts from powders that diffusion-bond easily. In this process, no outside pressure is applied to shape the part. The appropriate material, graded for size, is poured into a mold cavity, which is a void in the shape of the finished part. These metal particles are then heated to their sintering temperature at which point a metallurgical bonding takes place, and joining “necks” are formed at contact points.

Sintered PE filters are produced using the gravity sintering method. the PE powder is placed in a mold and sintered.

During sintering, the powder particles are fused to one another at temperatures well below the melting point of the material. this process gives the highly porous filters their characteristic shape and properties.

After sintering, the size and position of the pores are mechanically fixed. the powder particles also form a rigid whole. this gives the filters a strength, form and stability equal to those of a plastic component.

There are two main types of sintered PE filters as Hydrophilic & Hydrophobic

Polyethylene Filter

Polyethylene Filter

Porous sintered polyethylene products are a depth-filtration medium with distribution of pore size and length of passage qualities that are a factor of particle size, shape, and part dimension. The depth-filter not only has more dirt-holding capacity that a screen filter, but also has a higher pressure drop than a screen of equivalent porosity rating.

Filter Elements of Sintered Filters

Our various high porosity polyethylene filter elements can be manufactured in the following standard geometries:

1) Discs

2) Cylinders

3) Cones

4) Plates

5) Silencers

Standard Geometries of polyethylene filter

DALON FILTER Discs and Plugs

1) Ø d 1 mm to Ø d 250 mm

2) up to h 100 mm

DALON FILTER Rings and Hollow cylinder

1) Ø d 4 mm to Ø d 250 mm

2) up to h 1000 mm

and according to diameter, either seamless or welded from sections

DALON FILTER Plates

1) length up to 1000 mm

2) width up to 250 mm

3) height up to 50 mm

4) larger dimensions welded from sections

DALON FILTER conical with or without flange

1) Ø d 4 mm to Ø d 100 mm

2) h 8 mm to h 250 mm

DALON FILTER conical

1) Ø d 4 mm to Ø d 100 mm

2) h 5 mm to h 250 mm

DALON FILTER Cones with flange

1) Ø d 2 mm to Ø d 200 mm

2) h 2 mm to h 250 mm

As a leading supplier of High Density Polyethylene K1 K2 K3 K5 Biological Carrier Filter Mbbr Media, we always sincerely dealing with every client, our aim is to help our client to get more profits in cooperation with us. Continuous improvement is our eternal goal, customer satisfaction is our focus, and we look forward to sincere cooperation with you to promote our common development. Effective cost management is not only the source of enterprise profits, but also an important tool for us to compete with our competitors in the fierce market competition.

Hot Tags: polyethylene filter, China, manufacturers, suppliers, factory, wholesale, custom, flanged sleeve, PE filter, ss cartridge filter, metal bearing, High Flow Plastic Muffler, microplastic laundry filter