Diesel Engine Parts for Cummins Fuel Pump Throttle Shaft Bushing 3010941
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
Product Introduction
Our customers are very satisfied with our collar bushing, sleeve bushing self lubricating, Porous Plastic filter' performance and after sales service. We never compromise when it comes to quality because 'Quality is our top commitment to our customers'. Our company pays attention to the construction of enterprise culture, attaches importance to the concept training, and establishes the enterprise spirit of "unity, responsibility, efficiency and innovation", and has two teams of competent technology development and market development. Since our establishment, we have developed rapidly, our comprehensive strength has been continuously improved, and quickly developed into a modern enterprise integrating R&D, development and sales.
DALON BUSHING INTRODUCTION:
DALON self-lubricatingShaft Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).
The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of Shaft Bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
|
System of Measurement |
Inch / Metric |
|
Bearing Type |
Plain |
|
Plain Bearing Type |
Sleeve / Flange / Spherical * with Ring |
|
For Load Direction |
Radial |
|
Material |
SAE841 Bronze(CuSn9010) / 663 /A50-B50 |
|
Tolerance Standard |
F7 r7 Js13 |
|
Lubrication Method |
Embedded Lubricated |
|
For Shaft Type |
Round |
|
Shaft Mount Type |
Slip Fit |
Load Direction:
All Shaft Bushing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.
Startup friction causes these porous Shaft Bushing to release a thin layer of oil on the bearing’s surface.
DALON Shaft BushingFAQ:
Q: Bushing type selection?
A: The metallic structure of the self-lubricating bushing can be made from a wide range of bronze or iron based alloys. To select the proper material for a given application, it is necessary to check the maximum values of the material characteristics in comparison with:
- Shaft linear speed - v
- Applied load - p
- pv (load x speed) factor
Shaft hardness and surface roughness and other parameters such as working
temperature and type of lubrication, etc.
Q: Lubricant Oil Selection?
A: Standard impregnating oil conforms to SAE 30 specifications
Lubricants are suitable for the temperature range from -40°C to 150°C
Also have option for customer to made special oil impregnation by self
Q: De-impregnation & Re-Impregnation?
A: De-impregnation required Degrease and wash in appropriate solvent
Eliminate the lubricant in a furnace heated around 400°C for 40 minutes under a neutral atmosphere such as N2, or with reducing agent such as N2 + H2
Re-Impregnation need Immerge during one hour the parts in an oil bath heated at a temperature between 60°C and 120°C, depending on oil viscosity .Then cool down in an oil bath back to room temperature. Finally drain and dry the self-lubricating bearings.
Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Diesel Engine Parts for Cummins Fuel Pump Throttle Shaft Bushing 3010941. We provide various education and training opportunities for our employees to promote their rapid growth and continuously improve their professionalism, marketability and internationalization. We constantly improve our marketing ability, market competitiveness, human resource competitiveness to cultivate and enhance the core competitiveness of enterprises.
Hot Tags: shaft bushing, China, manufacturers, suppliers, factory, wholesale, custom, electric motor bushing, Impregnated Graphite Bushings, Sintered Porous Metal Filter, Sintered Iron Spherical Bushing, sintered bronze exhaust muffler, Flanged Brass bushing
