
Custom Replaceable Polyethylene PE Plastic Sleeve for Machinery Shaft Support Rubber Cone Bushing
DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
Product Introduction
Due to the wide application of our products and our favorable market position, we strive to sell our stainless steel water filters, Sintered Bronze Bushing, high temperature high load dry running sleeve bearing to more countries and bring our high-quality products and services to every corner of the world. We adhere to the overall planning of talents, scientifically set up posts, use career development to motivate people, use culture to agglomerate people, and use training to develop people. Our company has excellent pre-sales and after-sales service purpose, humanized service for our company to bring the industry good reputation and customer consistent praise.


DALON BUSHING INTRODUCTION:
DALON self-lubricatingShaft Sleeve Bushingare manufactured of pressed copper and tin powders by sinter technology and impregnated with lubricating oil and high porosity (20-25% in volume).
The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of Shaft Sleeve Bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.
|
System of Measurement |
Inch / Metric |
|
Bearing Type |
Plain |
|
Plain Bearing Type |
Sleeve / Flange / Spherical * with Ring |
|
For Load Direction |
Radial |
|
Material |
SAE841 Bronze(CuSn9010) / 663 /A50-B50 |
|
Tolerance Standard |
F7 r7 Js13 |
|
Lubrication Method |
Embedded Lubricated |
|
For Shaft Type |
Round |
|
Shaft Mount Type |
Slip Fit |
Load Direction:
All Shaft Sleeve Bushing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.
Startup friction causes these porous Shaft Sleeve Bushing to release a thin layer of oil on the bearing’s surface.
DALON STANDARD BUSHING LIST – (PART OF)
* more information of list, please contact DALON
|
Item No. |
For Shaft |
For Housing |
|
Unit Weight |
Lubrication |
Lubricant |
|
DOB |
ID, mm |
OD,mm |
Length ,mm |
,Grams |
|
|
|
DOB476 |
4 |
7 |
6 |
1.01 |
Lubricated |
SAE 30 Oil |
|
DOB484 |
4 |
8 |
4 |
0.98 |
Lubricated |
SAE 30 Oil |
|
DOB488 |
4 |
8 |
8 |
1.96 |
Lubricated |
SAE 30 Oil |
|
DOB585 |
5 |
8 |
5 |
0.99 |
Lubricated |
SAE 30 Oil |
|
DOB5810 |
5 |
8 |
10 |
1.99 |
Lubricated |
SAE 30 Oil |
|
DOB696 |
6 |
9 |
6 |
1.38 |
Lubricated |
SAE 30 Oil |
|
DOB6910 |
6 |
9 |
10 |
2.30 |
Lubricated |
SAE 30 Oil |
|
DOB6106 |
6 |
10 |
6 |
1.96 |
Lubricated |
SAE 30 Oil |
|
DOB61010 |
6 |
10 |
10 |
3.27 |
Lubricated |
SAE 30 Oil |
|
DOB61016 |
6 |
10 |
16 |
5.22 |
Lubricated |
SAE 30 Oil |
|
DOB6126 |
6 |
12 |
6 |
3.31 |
Lubricated |
SAE 30 Oil |
|
DOB7118 |
7 |
11 |
8 |
2.94 |
Lubricated |
SAE 30 Oil |
|
DOB8118 |
8 |
11 |
8 |
2.33 |
Lubricated |
SAE 30 Oil |
|
DOB81112 |
8 |
11 |
12 |
3.49 |
Lubricated |
SAE 30 Oil |
|
DOB8126 |
8 |
12 |
6 |
2.45 |
Lubricated |
SAE 30 Oil |
|
DOB8128 |
8 |
12 |
8 |
3.27 |
Lubricated |
SAE 30 Oil |
|
DOB81212 |
8 |
12 |
12 |
4.90 |
Lubricated |
SAE 30 Oil |
|
DOB81216 |
8 |
12 |
16 |
6.53 |
Lubricated |
SAE 30 Oil |
|
DOB8148 |
8 |
14 |
8 |
5.39 |
Lubricated |
SAE 30 Oil |







shaft sleeve bushing
shaft brass flanged metal sleeve bronze bushing
We have various levels of different Custom Replaceable Polyethylene PE Plastic Sleeve for Machinery Shaft Support Rubber Cone Bushing that can meet the needs of our different customers around the world. We uphold the core value of 'customer service as the center' with a group of highly enterprising professional and technical personnel, and implement modern scientific management in an all-round way to continuously enhance the comprehensive capabilities of the company. After years of development, our company's business all over the world, has become the industry leader.
Hot Tags: shaft sleeve bushing, China, manufacturers, suppliers, factory, wholesale, custom, Fan Motor Bushing, pe sintered filter, Sintered Porous Filter, Wire Muffler, Plastic Water Filter, shift lever bushing
[[ProKeywords]]You Might Also Like
-

Sintered Titanium Nickel Metal Film Filter
-

3 Inch Water Disc Drip Irrigation Filter
-

Stainless Steel Water Filter Cartridge SS316 Sintere...
-

High Flow Melt Blown Filter 1-50 Micron 30-40 Inch
-

Automotive Hardened Vehicle Removing Control Arm Bus...
-

High Precision CNC Brass Starter Bushing for Automot...
