enLanguage

Products

Bronze Plain Bearing

Bronze Plain Bearing

DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

We adhere to the concept of green development, continuously accelerate the pace of structural adjustment, and optimize the development of environmentally friendly stainless steel wire mesh filter, Exhause Muffling throttle, ss mesh filter. The company firmly believes that technology creates the future, details achievements, focuses on product research and development, and sincerely serves customers. Dedicated team spirit and the cooperative spirit of daring to work and take responsibility have enabled our company's products to win the favor and praise of our customers and our company's performance to rise continuously.

custom bronze bushingbush bearing

CYLINDRICAL oil impregnated bronze bearing

This most cost-effective form of bearing is primarily pushed into a pre-processed bearing bore using a mandrel.

TOLERANCES OF oil impregnated bronze bearing

Our sintered sliding bearings can be manufactured in accordance with the primary DIN1494, ISO and MPIF standards, but can also made to meet special requirements.

SINTERED BRONZE BASE

• Radial load up to 5 N/mm2

• Speed up to 3 m/s

• Good emergency running properties

• Stop & start operation

• Corrosion-resistant

The DALON Oil Impregnated Bronze Bearing achieved by means of sintering, which offer:

SAFTY

  1. Elimination of the risk of seizure
  2. Permanent lubrication film
  3. 20 ~30% of the volume is oil impregnated
  4. Quiet Function
  5. Low Friction coefficient

ECONOMY

  1. Elimination of lubricators
  2. Maintenance-free
  3. Permanent Stock
  4. Short Delivery Period

TECHNOLOGY

  1. High precision
  2. Loads up to 10MPa (100 kgs/Sq.cm)
  3. Speeds up to 30,000 r.p.m.

MATERIAL:

  1. SAE841/Lead free

IMPREGNATION OIL

  1. SAE OIL 30 / ISO-AT68 viscosity mineral oil
  2. Temperature from -20℃ to +120℃

ALLOWABLE LOAD

  1. PV = 2.5 MPa*m/s

DALON also possible to manufacture Oil Impregnated Bronze Bearingwith different size, materials and lubricants by special request.

Oil Impregnated Bronze Bearingbronze flanged sleeve bearingbronze flange bearingoil impregnated bronze bearing

 

 

 

We have been committed to providing customers with high-quality, one-stop value-added services and Bronze Plain Bearing, constantly improving our own advantages, and promoting large-scale business operations. We have formed a set of decision making mechanism, incentive mechanism and restraint mechanism that can carry out a virtuous cycle through continuous improvement. Obtaining the recognition of each and every customer is the unanimous pursuit of our employees. In order to ensure the stability and durability of our products, we attach importance to every production link to ensure that our customers are satisfied and assured.

Hot Tags: oil impregnated bronze bearing, China, manufacturers, suppliers, factory, wholesale, custom, sintered metal bearing, conical sintered filter, Graphite Bushings, compressed air filter elements, sae 841 bronze sleeve bearing, Cylinder filter

You Might Also Like