enLanguage

Products

Bearing Parts Sleeve Bushing Auto Bearing with Oil Hole 34X40

Bearing Parts Sleeve Bushing Auto Bearing with Oil Hole 34X40

DALON self-lubricating sintered bronze bushing are manufactured of pressed copper and tin powders by sintered technology and impregnated with lubricating oil and high porosity (20-25% in volume). The oil contained in the porosity provides a constant lubrication between bearing and shaft, the system does not need any additional external lubricant, allows this type of sintered bronze bushing to work under hydrodynamic conditions. which resulting in a very low friction coefficient and maintenance-free for general engineering applications.

Send Inquiry
Product Introduction

The company is a manufacturer specializing in the production and sales of drill bushing, bronze oil filter, disk filter, with strong strength, complete equipment, advanced technology, perfect testing methods, a sound management system and a perfect quality management system. The products are sold throughout the country and are trusted by users. We will adhere to the requirement of being stronger and better, and essentially promote the sustainable development of our company. Our company has advanced production equipment and management philosophy, and has a united and upward management team. We have strict requirements on product quality.

custom bronze bushingbush bearing

DALON Long Life Sleeve BearingADVANTAGE:

With no moving parts, Long Life Sleeve Bearing are the simplest type of bearing. Compared to ball and roller bearings, they generally handle higher temperatures and perform better in dirty environments. They are also intended by design to be self-lubricating, maintenance free and low cost.

Performance

An extremely wide range of operating loads, speeds and temperatures:

  1. Dynamic loads from 6 to 75 MPa

  2. Linear speeds up to 8 m/s

  3. Operating temperatures from - 180°C to + 300°C

Suitable for use in a wide range of environments

  1. Marine environment

  2. Radio-active environments

  3. Contact with corrosive liquids or substances incompatible with oils

  4. Food preparation

Reduce of design and ownership costs

  1. Maintenance-free operation

  2. Lower cost compared to cast metal and machined bearings

  3. Complex designs and forms possible

  4. High dimensional accuracy

  5. Excellent surface finish

  6. Reduced weight compared to similar non-porous components

Safety

  1. Permanent oil film lubrication

  2. Low friction factor

  3. Quiet operation

  4. Good operation at low speed

  5. Corrosion resistance

 

Load Direction:

All Long Life Sleeve Bearing are designed to handle radial loads, thrust loads, or a combination of the two. Radial loads are perpendicular to the shaft. Thrust loads are parallel to the shaft. Sleeve bearings handle radial loads. Flange sleeve bearings handle both radial and thrust loads. Thrust bearings handle thrust loads.

Startup friction causes these porous Long Life Sleeve Bearing to release a thin layer of oil on the bearing’s surface.

Long Life Sleeve Bearingbronze flanged sleeve bearingbronze flange bearinglinear plain bearing

long life sleeve bearing

 

After years of production practice, combined with reasonable suggestions from users, we continue to update, improve and perfect the original Bearing Parts Sleeve Bushing Auto Bearing with Oil Hole 34X40. The products are now sold throughout the country and exported to many countries and regions. Of course, excellence is outstanding, and every product of our company is our sincere and sincere dedication. We will continue to strive for progress and innovation on the basis of our existing achievements, and make new contributions to national economic construction and social development.

Hot Tags: long life sleeve bearing, China, manufacturers, suppliers, factory, wholesale, custom, air silencer muffler, sintered metal filter disc, small linear bearing, hydrophilic plastic filter, Stainless Steel Woven Wire Filter, Corrosion Resistant Muffler

[[ProKeywords]]
You Might Also Like