Cleaning Method Of Stainless Steel Sintered Net Advantages Of Stainless Steel Sintered Net

Ultrasonic cleaning is a method to remove the sintering net from the equipment and then clean it with special ultrasonic. The advantage of ultrasonic cleaning is that the cleaning is thorough and clean, but it has a great impact on the production efficiency because it needs to be cleaned every time.

Baking cleaning can also be called heat treatment cleaning method. This method is generally used when the law cleaning method can not work. When it is applied, it needs to heat the oven first, and then dissolve the adhesive material.

Reverse water cleaning method can also be called reverse cleaning method. The specific operation method is to blow inert gas such as nitrogen from the opposite direction to the sintering net for flushing. This method does not need to take out the sintering net from the equipment, but can directly reverse operation, saving time and labor.

These methods have their own advantages and disadvantages, and can be selected according to different needs in practical application.

1、 High strength and rigidity

Compared with other products, the strength and rigidity of sintered net have certain advantages, and it has good performance in processing, welding and assembly, so it is more convenient to use.

2、 High precision and uniformity, and stable filtration coefficient

The processing technology of sintering net determines its quality. In the process of filtration, the mesh of sintering net will not change, and the long-time filtration can still achieve uniformity

The results show that the filtering accuracy is high.

3、 It can be used in many different environments

This kind of product can be used in both acidic and alkaline environment, and the temperature requirement is not high. It can be used in the low temperature of minus 200 to high temperature of 600Can be applied.

4、 It can be used repeatedly. Just clean it regularly

Stainless steel sintering net can be used repeatedly. After a period of use, if the filtering accuracy is affected and the mesh is blocked, the product does not need to be replaced. The product only needs to be cleaned. The cleaning method is relatively simple. If you do not want to dismantle it, you can directly use the back cleaning method. For special industries, you can use ultrasonic cleaning or dissolution cleaning.